Showing posts with label faux finishing. Show all posts
Showing posts with label faux finishing. Show all posts

Friday, July 27, 2012

Evolution of a Powder Room: Removing Yet Another 70s Era Wallpaper

When I married my husband, I moved into a house with a lot of 70s type wallpaper.  For a decorative artist like myself - that's like being in purgatory (or worse!!!).  Now, I love wallpaper...well-done, handpainted or beautifully textured or patterned wallpaper.  But - the living room, the powder room, the kitchen, the dining room - the upstairs baths and all the bedrooms had 70s era wallpaper....and I just couldn't live with it. So, slowly but surely, I began to remove all of it. I will feature more of the before and afters in coming months.  I only have one last wall of wallpaper to remove - a camouflage paper (spare me) in what will become a nursery for my new grandchildren,

Can you tell that I like monkeys and pineapples??

Here's a picture of our powder room right after I did the last transformation...first removing all the wallpaper, then oil priming, painting and doing an embossed stencil and tissue finish.  I say "last" transformation because the finish was the same - only the room was, at first, painted an antiqued gunmetal silver - which I really loved.  But as I was re-doing my home, the colors of adjacent rooms were getting warmer and warmer - so the silver just didn't go with the palette I was coming up with.  I chose a softer and warmer metallic color - called Veridine (from Faux Effects). Then I gave it an antique bronze glaze. I covered the switchplates also - to give it a more uniform look.


A view of the vanity and counter - which were chipping and peeling orange/yellow oak

My inspiration photo done by Melanie Royals of Royal Design Studio

 
Here is the first color of the powder room finish - a gun metal silver

The vanity and countertop were really horrendous and way past their prime - but my husband didn't want to buy anything new because the vanity hid all the pipes underneath (which also include some pipes for the washing machine in an adjacent room - don't ask!). This powder room has 7 sides - it's really an oddity and I could have gutted the whole thing and started over - but that would have been too much $$ for my husband to handle.  So, I made do!  I sanded and primed...painted and glazed...and clearcoated the vanity and countertop and it's held up beautifully over the years.

I don't have a before picture of the powder room - but I do have a snippet of the wallpaper.  Was it horrible?...not really.  But it was dated and it did't really say anything about me and the spirit I wanted my home to portray.  This room and the wallpaper were someone else's idea of beauty - not mine.  So, I had to change it.


It was perfectly nice - but it didn't say "me." And coupled with the peeling, orange yellow vanity and countertop - it had to go!

About the Wall Finish:  The one thing that is difficult about doing this finish is the amount of time and patience it takes to do it.  It's not an overnight sensation...and trust me - I needed a shrink during and after the process.  When you are doing an embossed, raised stencil on a wall - you first have to stencil most of it on the wall first in a light tone.  Why?  Because when you do anything raised/embossed on a large surface - you can't easily go from design to design in a row...because the plaster or whatever you are using to make the design raised - is still wet.  So, you have to jump to another section that's dry in order to do your next raised/embossed area.  So, in this design that I decided on for this room, I first had to make the design "stripes" level and equidistant - I had to stencil just about everything in a tint on the wall before I could trowel any material through the stencil to make the raised design. I hope I didn't lose anyone here yet!! You also have to do this to make sure your vertical design is level and not "off."  So - it's a process...that takes a lot of time. 

Whenever I price this for a client, they always look at me a little crazy because they see the finished product and think "Oh - that's beautiful...I want it."  But when I explain how much time and precision it takes to pull it off...they back off.  Only interior designers so far have said "No problem - I love it.  Let's do it!"


A closer look: You'll see the slight wrinkled texture on the wall.  You don't "have" to do this...but I laid gently wrinkled gift tissue over the entire wall as I was painting the color on the wall.  One of the reasons I did this was because my surface was not 100% perfect - it showed some leftover wallpaper lining and I just wanted to give the wall a little extra texture.  If your walls are perfect - you do not have to do this step and I wish that I could have skipped it!!




A closer look at the wall finish - see the slight wrinkled texture?

One very important note about doing an embossed stencil design with a tissue finish:  Once your tissue is on, you have to make sure that the tissue lies flat next to the raised part of the design.  I had to flatten out the tissue many times and I also had to pin prick some of the bubbles that this finish naturally creates.  Did I get every single one perfect?  No - but overall it looks good and you can see every part of the design.  Next time I do this, I won't choose such a small stencil design - you can see it above to the left of the larger design.  That was a nightmare to get all the tissue to lay down around the design.  So - don't do this!  Choose larger designs to emboss - much easier!

And another tip - if you have to go through some curved surfaces like I did...pick a simpler design!!

For the vanity and countertop:  I first sanded any chipped spots, then oil base primed it and then painted the base in Off White from Faux Effects.  To antique it, I used a brown and gold glaze. The countertop - I sanded it (A-LOT!!!) and then I oil base primed it in a tinted dark brown primer - and then I did several coats of Modern Masters' Statuary Bronze.  I then did several coats of Faux Effects Satin topcoat called Varnish Plus.  I cannot tell you how much I love this product.  I used it on this countertop and while I was re-doing my kitchen, this powder room became my "slop sink" when I was doing any other type of painting or cleaning or washing dishes.  The countertop stayed clean and beautiful after a TON of punishment!!!  Enough said - go buy it!!!!


For the interior section of the vanity, I painted it the Veridine color and then stenciled Royal Design Studio's Small Victorian Grille.  Modern Master's Statuary Bronze surrounds it - but I sanded it back to age it.  I kept the same knobs - only I painted them in the Statuary Bronze.  I plan on changing them soon.  Anyone have any suggestions?  In my kitchen I have the French Birdcage ones in oil rubbed bronze and I love then - so that's a possibility.  But I would love some other ideas.

Future Changes: I am also going to do some other changes to the room.  I'd love to put something different in that center panel in the vanity.  A handpainted monkey or pineapple?  Or is that overkill? I also want to perhaps get a new stone or granite top for the vanity...plus a new sink, faucet and light fixture.  I would also love to do a raised design on the panel right below the countertop - I think it's calling out for something!  And finally, I'd love to do something special to the ceiling.  Right now it's a mid tone sage green, which is nice - but it needs some pizzaz! I'd like to add some moldings as well on the top but with 7 sides...it's a challenge.  I had though of spray painting a thick rope in bronze and then attaching it.

Would love to hear from all of you on what you'd like me to do with the room...and then I'll post the changes.

Thanks for coming by to see this project! For another project I did with raised stenciling, Click Here.

Sharing this with...



Sunday, July 1, 2012

Antiquing Kitchen Cabinetry in New York City and a Surprise

A short while ago I had to help a client in Manhattan who had had a flood in her kitchen - which marred the cabinetry that I had painted and antiqued nearly 6 years earlier. The only day I could go was when President Obama was in town. That meant I was going to experience some nerve wracking, heart attack inducing traffic as I live on the eastern end of Long Island and the drive to Manhattan can take over 2 or more hours. But the slow traffic allowed me to take some shots along Central Park West while I was waiting to move uptown.

Heading uptown:The large pic on the left is the famous Dakota building, where John Lennon lived

My client's small NYC kitchen had looked darker and smaller with mid toned maple cabinetry - which was in great shape but the somewhat dark tone of the cabinets didn't help the small space. I wish I had taken shots of "before" but who knew then I was going to have a blog!!

The finished cabinetry

The flood had damaged two major areas in the kitchen and all along the baseboard as well.  We first primed and repainted the areas with the same paint we had used - an off white.  After that was dry, I looked at my recipe that I had used for the antiquing and made up a sample glaze.  I used the exact same measurements of tints - some Van Dyke Brown and Raw Umber - but the glaze wasn't matching.  I guess it could have been that the cabinets aged somewhat in 6 years.  I had to add a touch of a warmer brown to match it exactly.

Before...and the application of the glaze with a chip brush


All the glaze is on...just needs to be manipulated and smoothed.  What's that on the right?

Moving and smoothing the glaze first with cheesecloth and then - a badger brush to smooth out

Pardon my fat, old unmanicured fingers - but I thought it would be helpful to new faux finishers/DIY homeowners to see how how I gently age a painted cabinet. The cheesecloth is great for moving the glaze around - you have more control of how much you want to remove.  The cheesecloth can also help you push some glaze into crevices etc to get the look of built up dirt and age. The badger brush - which should be in everyone's arsenal - softens and smooths out a glaze.  It helps to give the cabinet a more natural, softer look.

The right side panel now blends with the rest of the cabinetry

While I was antiquing the cabinetry 6 years ago, the powder room in the apartment was one of the tiniest I had ever seen.  I suggested to my client that while I was painting and antiquing the cabinetry, I could have one of my artists come in and paint a quick, impressionistic mural that would help make the room seem larger...more expansive and interesting.  She agreed - and so it began. Here are some images from the room.




See how tiny this powder room is? You really need something interesting in here - or else you'll get claustrophic being in this space!

So, after a day's work it was time to fight the traffic again and head back home.  It took nearly 3 hours to drive back but I felt great that the day went well and that my client was happy!  I took some parting shots while driving (bad girl), but I thought you might like to see them!

"Slow down, you move too fast!"  Going over the 59th Street Bridge!

Hope you enjoyed my day in New York City.  Let me know if you have any comments or questions - would love to answer them.

Sharing this project at...

Between Naps on the Porch; Nifty Thrifty Things; Saturday Nite Special; Sundae Scoop; Be Colorful; Boogieboard Cottage







Friday, April 20, 2012

Gold Leafing and Antiquing a Fireplace Mantle

When I finally convinced my husband that we needed a kitchen renovation, I figured that if I got him that far...let me see if I can also get another room added on - a great room, off the kitchen.  Amazingly he said "yes!"  This was a few years ago - and I have been working on this great room since then.  It's been a work in progress.

Since my laptop is in the repair shop (my hard drive was damaged...so I won't have access to a lot of my pictures til next week or so), I'd like to share the pictures I do have to show you the work I did on the room.


First Incarnation...

I was happy to finally have a fireplace and mantle in my home - yippee, something else to decorate! (And that tree was supposed to be on our deck then - sorry about that one). But having the mantle so stark white really wasn't doing it for me.  I had done a nice sueded plaster on the walls in a cinnamon hue - very Ralph Lauren-ish kind of look and feel (without it being Ralph Lauren material!)...and I loved the warmth of it. 

So - what's a girl to do to make it all come together?  Add some decorative onlays, gold leaf them and then antique the entire mantle.

 Mantle...After


The gold leafing (or gilding) of the onlay gave the mantle more distinction and character, I think.  And the antiquing gave the onlay a nice patina - and now the tone of the painted wood blends so much better with the finish on the wall. Before the white just shouted at me - I am so much happier with this look.

Closeup of gilded and antiqued onlay

GILDING TIP: I first painted the onlay with a yellow gold paint - this will help you out later...because not every piece of leaf will stick! I used Gold Leaf sheets from Michael's - nothing fancy. But after you put on the size (the glue that makes the leaf stick to what you are gilding) - let it come to a tack. Don't put the gold leaf on when the size is still wet. Never place your finger on the size to check if it's ready - use your index finger knuckle to check it. Once it's ready, place the sheets on your object and tamp them down softly with a soft artist's brush. Once everything is on your onlay (or whatever you are gilding), take some cheesecloth and start to take away the gold leafing that didn't stick.  You can use an artist's brush to get into any crevices etc.

Once that's done, use your cheesecloth to burnish the gold leaf - you'll begin to see that it starts to get shinier.  Now - the leaf sold at Michael's and elsewhere is not real gold leaf...so the leaf will look a bit too brassy.  But after you antique it (as I did - with the rest of the mantle), it will lessen the shininess.  In addition, I took an artist's brush and took some dark brown tint and brushed it on to age and darken it.  You can also use a dark wax (Annie Sloan's or Liberon etc) to do this as well - and that will protect and seal your work!

So - hope you enjoyed this.  If you'd like to see a few more pics of this up close...click the links below to my website. 

Happy painting!!!


Closeup of the Mantle Finish 

Closeup of the Gilded Onlay 

Thursday, April 19, 2012

Weekly Faux Finishing Column Idea: What do you Think?

I am distraught today because I don't have my laptop - it's in the shop getting a little overhaul (and I hope it's "little"!!). So I thought I would try something different for a blog post and see what kind of reaction I get.  This morning, I took some pictures of some sample boards that I've done and I've uploaded them to my husband's laptop.

I am thinking of doing a weekly column called "Sample Saturday...or Sample Sunday."  So, please comment below and let me know if you think you'd like to see something like this weekly!

In the column, I would show you a faux finish or a furniture finishing idea - with a recipe.  I'm going to start out with a troweled faux finish that I love - it's a little difficult, but I will show you how you can make it simpler.

Metallic Plaster with an Embedded Stencil


Now, embedding a stencil can be a little difficult (especially this stencil because I used one with 3 overlays).  You can make it easier on yourself if you use a stencil with just one overlay!  Or you can just do a a regular stenciled design over the metallic plaster.  If you are a beginner, do a single overlay stencil. But, as with any new technique, I would do some practicing on a sample board (like I did on this one).

I would encourage you to try to do a troweled finish like this - it's easier than it looks.  It just takes some practice. I used a product called LusterStone from Faux Effects.  It can be ordered online - but there are many Sherwin Williams dealers throughout the country that carry this product. It's the same product that I used on my Ceiling Design. There are several metallics on the market - Modern Masters makes two different kinds - Shimmerstone and Metallic Plaster. You can also use any of the faux suede products as well...but I love the luscious shimmer that the metallics give you.

FIRST LAYERS

1) First, roll two layers of a good latex paint in a color that is the closest to your plaster color. I used a Terra Cotta color because that's the color I used for the plaster.
2) Add about 10-15% water to your metallic plaster and mix fairly well.  With a small roller (Whizz roller i.e.), roll this mix haphazardly - don't do it like you are painting (up and down).  Do some strokes diagonally, vertically and horizontally - for a little movement. Let dry.
3). With a stainless steel trowel, apply the plaster full strength.  But don't put it on too thick or it will crack.  It's a fairly easy material to move and it stays moist for quite a long time.  Aim for about 85% coverage - leaving some areas of the first layer showing.  This will give some textural interest to the plaster. Let dry.


 Close up of the Embedded Stencil


EMBEDDED STENCIL LAYER


4) I used the Rinceaux Fruit stencil from Royal Design Studio, but you can used any design that you'd like. I used some spray adhesive on the back of the stencil - but I also taped all the sides.  I mixed up several different colors for the fruits - some yellows, greens, plums.  One thing that's great about using the LusterStone is that it comes in many different colors - but they also have a tinting base (which I used here as well).  You can add tints to the tinting base to get the color you want for the plaster.  So, instead of buying many different quarts of the metallic plaster to do the raised designs...you can buy a quart or so of tinting base and create your own custom colors.  You can use Sherwin Williams or Benjamin Moore tints (yes - the same ones they use for their paints). Just ask your paint dealer for a quart of tint only...not the paint.  Put a few drops into the plaster - and build up to the color you want.

5) You want to have the stencil on very well because you don't want any leakage from underneath the edges of the design. For my "trowel" I cut a small square of a piece of styrene board and then I lightly sanded the edges to soften and round them a bit.  Pick up a small amount of your tinted plaster onto your "trowel" and trowel lightly into the design areas of the stencil - green for the leaves, purple for the grapes and plums etc.  You will have to place some tape over the areas you don't want "green" for instance.  If you are doing a multi-overlay stencil, you have to make sure each layer is dry before you put the next overlay on.  If you are doing the above stencil or something like it, you can give it a little more realism by adding shading to the leaves and fruits.

Tip: If some of the plaster has seeped out a bit - don't worry!  Use a Q-Tip to remove the plaster that leaked out.  It doesn't have to be 100% perfect because you will be suffusing the design with another layer of plaster.
 
THE FINAL LAYER


6) Once your stencil design is completely filled in with the plaster and dry, you then do one more layer to "embed" it.  You can use the same color plaster you used in step two (the watered down version).  But I used a lighter, more neutral color - Champagne Mist.  I just put maybe 5-10% water into the plaster.  I put it on first with a brush - and then I took my stainless steel trowel to move the plaster around. It's like you are "frosting" the finish.


So...give it a try.  It's a beautiful finish for just about any room.  You can even use it on furniture.  A single motif embedded in the center of a cabinet door would look gorgeous!


Happy painting!


Friday, March 30, 2012

What to Do With Kitchen Soffits

I've posted about this before on this blog and on my home staging blog - but since this project has been featured on some other blogs and the topic is very popular, I thought it would be a great idea to post it once more with some additional information on how I created the look.

This is a sort of "before" pic, but this was after we added the crown molding

Soffits (or bulkheads) above kitchen cabinetry makes a home feel dated. And if you paint the soffit a contrasting color it only makes your cabinetry seem smaller and it makes the height of the kitchen less tall looking.

If your cabinets are in good shape, you should add crown molding to the ceiling above the cabinets and add some trim molding to the bottom of the soffit. 

Me...putting the first woodgraining layer on

Since these cabinets were in great shape, we decided to go with an oak woodgraining for the soffits and moldings. The "trick" to getting the oak woodgrain (or any faux wood) right is to try to match the underlying color of the cabinets.  Oak has a glow to it so I first used a medium tone yellow base paint (1 part Woody Yellow and 1 part Neutral White basecoat from Faux Effects) and then I did a pale gold metallic paint over that (a pale wheat color from Faux Effects Metal Glow line). You could also just do a gold glaze over the basecoat - just enough to give it a glow.

After - doesn't this look better, more updated and...tall!

Then I made up a glaze for the woodgraining layer.  I used Chestnut Brown and Earth Brown Glaze and went over (in sections) the soffit and moldings.  I created the woodgrain by removing the glaze with a wipe out tool.  I used torn pieces of corrugated cardboard.  Then when it was dry, I took a paintbrush and darkened the grain to match what I was seeing in the cabinetry.  I also used a graining comb for the smaller areas and around the wood grained areas (you can buy this at Home Dept I believe - or at Michael's).

Then I overgrained the entire surface with the same graining material as the first layer.  I had to adjust the color here and there because the color of the oak cabinets differed in various sections.  Some I had to make a bit darker...some cooler.  Then after everything was dry - I did a faux marquetry design on the soffit...the fun part of the job!

You could use any border stencil for this.  I used Renaissance Scroll from Jeff Raum stencils. I used some mahogany, ebony and cherry Stain and Seal from Faux Effects for this technique. However, you could also look at Royal Design Studio's line of stencils.  The owner, Melanie, has many that I love - the Showcase Scroll is one of my favorites.  If you'd like to try a carved wood look, try the Palermo Scroll or Endless Acanthus Scroll.

It takes time and a lot of practice to do woodgraining, but it's worth it to take the time to learn.  It has come in so handy so many times for me.  If you don't have the time (or patience) and you'd like to re-do your cabinets that have soffits - you can paint them a white or off white and antique them and it will give you that updated look.  As long as you add the crown molding, your cabinetry will seem taller.

Hope you enjoyed this!


Sharing with...




Monday, February 20, 2012

My Latest Project: Fixing Faux Finishes in a Home for Sale

The Entry before...

Sometimes I am called on to fix a faux finish, instead of only just doing one.  This beautiful home is currently for sale in Southampton NY for $6,975,000. There were numerous changes done (adding light fixtures etc) and of course some cracks that resulted over the years and needed to be fixed - and so the owners wanted the faux, that had been done many years ago, fixed rather than go through the expense of painting the entire house.


During...


Entry...After



Before...

Living room before...

After...

After...

Living room...after


Living room

If you have never tried to fix a faux finish (especially when you didn't do the finish in the first place as in this case), it's one of the hardest things to do well. What happens is that you can't just dot in the color into the patched and primed spot.  It doesn't work.  If you try to do that, it just creates a halo effect and you can see where the "join" is.  You have to create a color that is the closest to the base color and then you swish the color in...blending it in without following the outline of the patch. Then add a little darker glaze and feather that in - as in the drifts that are part of this finish.  Sounds easy but it wasn't at all. 

The Den Wallpaper Fix

I also had to fix many areas in the den.  Oh boy - this was a job.  I had to match a wallpaper of all things.  First, the ceiling above the window seat...

Before...


Before...


After...


After...

Since the home sellers did not have the paper that was used, I had to improvise.  I primed the areas, then used gift tissue, slightly wrinkled (like I did on my Bookcase Project) then painted it.  I created a glaze color that matched the color of the paper and then glazed the whole ceiling.

By the other window in the room there was more damage...


Before...


After...
Blending it in without it looking like a different paper/finish was a bit difficult - but it came out better than even I thought it would!  Sometimes - I surprise myself. The room is really a beautiful one - so it was worth the extra effort.




After...

There were some other areas throughout the room that were discolored and we had to devise a color that would blend in best to disguise it. But - the room looks really great now.

The only full faux finishing that we did in the home was in the dining room.  I just created a very soft, mottled finish that warmed up the space.



The home looks really wonderful and warm so I hope that all of the effort nets the owners a sale. It took us all week to get the work done - so I apologize for not blogging as much last week.  Hopefully this long post will satisfy!

Some knowledge of color theory and faux finishing techniques can really help save time and money.  In this case, the home sellers would have had to have most of their walls re-painted and the den walls would have had to have been stripped of the wall paper, primed and re-painted.  That would have been costly - time and money-wise.  As they were having an open house over the weekend, there wasn't the time to do all that.  So...once again...Faux to the Rescue!

If you are interesting in seeing this beautiful home, please call the realtor, Tim Davis of Corcoran at 631 283-7300.  The website for the listing can be found HERE

You may be interested in another project -  a $3.5 Million home that we staged that sold in 3 1/2 weeks.  Click Here 

Linking this project up to these blogs...



Monday, January 16, 2012

A Faux Cobblestone Dog House

Every once in a while, I get to do something tremendously enjoyable. I was working in a beautiful and very expensive kitchen which was being revamped. There was a closet in the space that the client didn't know what to do with.  She wanted a bulletin board space for her children - a place where her 4 kids could post their school and extra curricular activities etc. I suggested that we divide the closet in half and have the upper half for the kids...and the lower half...for their beloved dog (who was a rather large dog with the temperment of an angel!).  This is what I came up with!





I had their contractor fashion out a dog house facade shape from sheetrock which I then primed and painted. I wanted to keep the same look as the floor, so I first rolled on a texture (Sandstone from Faux Effects) to mimic the grout.  I let it dry (not...I used a hair dryer and made it dry faster!) then I taped the pattern of the cobblestones with 1/8" tape. I burnished it to make sure it stayed put. Then I troweled on a few tinted layers (some whiter, some with a bit of ochre and some raw umber) of a texture called Quartzstone from Faux Effects.  For getting in to some of the smaller areas, I made my own little plastic trowel from a styrene board.  After it dried (the next day), I toned it (with some of the same tints I used in the texture) here and there to match the floor even better.

I loved doing this project because it really helped keep the look and feel of the kitchen - but it served a practical purpose.  Decorative techniques can really help solve problems.

If you are having any difficulty figuring out any problems with your rooms, just give me a call.  I am sure that I can come up with something unique and beautiful!

I am linking this project to...

Blue Cricket Design

Miss Mustardseed

Between Naps on the Porch

Hope Studios' Tutorial Tuesday

Home Stories A to Z

My Uncommon Slice of Suburbia

Sugar Bee

Strictly Homemade

Cherished Bliss

Coastal Charm

Shabby Nest

Redoux

Feathered Nest

Romantic Home

Wednesday, January 11, 2012

Using Art as a Starting Point for Choosing a Color Palette for Your Rooms

I love to use artwork to inform a color scheme in rooms that I am working on. Artists use and combine colors in such unique and beautiful ways...so it's virtually foolproof letting a great piece of art be your guide to a beautiful color plan. 

Artist, Kathe Frage Via

This beautiful piece, available on canvas or paper, is very modestly priced and it can be the inspiration for a sweet room.  You could frame it in a faded gold - or a cream frame. I then might do a wainscoting and trim in Benjamin Moore's White Opulence (Classic Colors, 879) because it's a warm white that has a little touch of pink in it. Then for the wall color above it, I would think about Benjamin Moore's Love and Happiness (1191).  For a little extra texture, I might do a vertical stried finish on the wall with a creamy pink glaze. For the ceiling - I'd mix the two colors together to get a barely there pale pink - just for a blush color overhead.

Benjamin Moore's Love and Happiness (1191)

For a little girl's bedroom, I'd add a colorful floral, like Quadrille's Henriot Floral as an upholstered headboard. I'm partial to the name "Henriot" because it's the name most closely associated with Quimper pottery (which is such a favorite of mine).  

Quadrille's Henriot Floral in Pinks on Ecru

I'd add a cream or ecru duvet cover (that would match the background of the headboard).  I add a red and cream polka dot for the dust ruffle and for a pillow or two. Duralee offers this fabric - but I'm sure that this would be fairly easy to source less expensively.

Red and cream polka dots for the dust ruffle and a pillow or two.

Some extra pillows for the bed could be...


Robert Allen's Flower Prints in Poppy



A pink velevet - Kravet's Versailles


Robert Allen's Zinging Along in Poppy

I might do the Versailles pink velvet, edged with the Quadrille Henriot fabric as a throw at the bottom of the bed.

Window treatments: I could also see the red polka dot fabric as a Roman shade - with the Quadrille Henriot fabric as the draperies.

Carpet:  I would love to see something that's easy care - maybe a slight shag in a pink or slightly darker to help ground it.

Additional art could be something like these decals from Surface Inspired on Etsy. You can order them in just about any color.




Just Another Idea for a Little Girl's Room:  I would do a vertical stripe with the Love and Happiness color and White Opulence by Benjamin Moore.  We did a pink and cream stripe in a little girl's room that came out so beautiful. My client and I (and her mom) went to the Kips Bay Showhouse in New York City several years ago - and my client went nuts over this room designed by Bograd Kids.  She wanted something similar for her little girl in their new home that they were renovating.


Inspiration Room


She so loved the Showhouse space that as soon as the room was ready, we were in there painting...stripes! A lot of them - it was a very big room!




We also revamped all of the furniture in the room (that was in the family for over 60 years) by painting it a soft cream and antiquing it. 

If you would love to have a Showhouse-inspired room in your home, give me a call at 631 793-1315


Related Posts Plugin for WordPress, Blogger...